Monitoring and Communication

Fundamental

This advanced product suite is designed to leverage your existing network infrastructure, enhancing the monitoring capabilities of your distributed Emerson Network Power products. The OpenComms line of products will provide cost-effective centralized status and alarm monitoring of your network-enabled Liebert equipment.

	OpenComms NIC The OpenComms NIC Card transforms Liebert units into manageable nodes within your Network, NMS, and BMS systems. > More Information			OpenComms Web Card The OpenComms Web Card provides SNMP and web-based management to your UPS. The card gives you the power to monitor and control your Liebert UPS from not only your Network Management Station, but from any PC running Microsoft® Internet Explorer™. Connecting to your UPS is a simple as launching a web browser. > More Information
	OpenComms Nform OpenComms Nform software solution combines full-scale monitoring with cost-effective deployment through the use of the existing network infrastructure -- so the cost of dedicated, out-of-band communications cabling is eliminated. It is both scalable and adaptable so it can grow as your systems expand and needs change. > More Information			OpenComms EM The OpenComms EM is a compact device designed to monitor temperature, humidity and contact closures and notify personnel when conditions exceed user-defined limits. The OpenComms EM takes up zero U rack space and can support any combination of two sensors. The supported sensors are temperature, humidity, temperature & humidity combination and contact closure. > More Information

Automated Shutdown

A full line of power communications software and hardware products provides both network enabled and dedicated out-of-band options for each level of power protection.

	MultiLink MultiLink version 3.6, is your scalable network power protection solution. Run MultiLink on one machine to monitor your power and ensure a graceful, unattended shutdown in the event of an extended power failure. > More Information			Intellislot Relay Interface Card The Intellislot Relay Interface Card supports UPS systems equipped with the Liebert Intellislot communication port and is user-installable and hot-swappable. > More Information
	Multiport The Liebert MultiPort 4 multiplexing unit communicates the On Battery and Low Battery status of a single UPS to multiple PC's, servers, or workstations utilizing dedicated wiring. > More Information			IntelliRack The Liebert IntelliRack multiplexing unit with MultiPort 4 cards communicates the On Battery and Low Battery status of a single UPS to multiple PC's, servers, or workstations utilizing dedicated wiring. > More Information
	CommSure™ - 50Hz Redundant Power Automated Shutdown Solution Network managers can create their own redundant, high availability power system using existing UPS systems and the CommSure™. > More Information

Leak Detection

A wide range of leak detection systems provides fast detection and location reporting of potentially hazardous fluid leaks.

	Liqui-tect Monitoring System Comprehensive Detection of Water Based Leaks in Critical Spaces > More Information			Zone Sensor LT460 Liebert's LT series leak detection modules install quickly and work simply for reliable warning of potentially hazardous moisture leaks > More Information
	Point Sensor LT300 and LT410 Liebert's LT series leak detection modules install quickly and work simply for reliable warning of potentially hazardous moisture leaks. A simple two-wire connection signals the alarms at a Liebert environmental unit monitor panel or at another monitoring panel. The LT300 and LT410 provide leak detection at critical points under a raised floor. > More Information			Leak Detection Cable Liebert’s LT500Y leak detection cable is designed for easy installation and unlike other sensing cables does not exhibit memory. > More Information

Monitoring Panels

Autonomous microprocessor-controlled modules are available to provide supervision and control of Liebert equipment, giving you the ability to monitor up-to-the-second status on system protection. Information can also be provided to centralized facility management systems.

	Universal Monitor The Universal Monitor is a microprocessor with multi-sensing, remote monitoring and remote control capabilities. Its advanced technology provides high-availability monitoring around the clock. > More Information			TW420 and THW420 Sensors The TW420 and THW420 sensors provide temperature and humidity inputs to the Universal Monitor. > More Information
	Controllers, AC4 and AC8 The Liebert Controllers are ideal for coordinated control of systems with redundant equipment, such as multiple environmental units or pumps. > More Information			Autochangeover Controller, TELE2 Liebert Autochangeover Controllers monitor running and stand-by InteleCool2 units for proper operation. > More Information
	Environmental DO Interface Card Interface Card provides 16 discrete outputs, corresponding to status and major alarm conditions of Environmental units. > More Information			Power Supply, Transformer Modules The Liebert Transformer module provides centralized power distribution for 24 VAC loads with two independently fused 40 VA isolated outputs. > More Information
	SiteNet Integrator and Load Control Module SiteNet Integrator allows virtually any electronic device to become a part of your SNMP management system, by simply connecting to the rackmountable or desktop unit. > More Information			Remote Access Panel, Remote Power Monitor Panel (RPMP) The Liebert Remote Power Monitor Panel (RPMP) provides a better way to monitor your critical power systems, allowing you to respond quickly to alarms and out-of-spec conditions that could jeopardize your electrical operations. > More Information

Battery Monitoring

Preventing battery failure is essential for delivering maximum availability. Emerson Network Power products incorporate Alber technology to extend battery life, reduce maintenance cost and increase safety.

	Albér Cellcorder® CRT-400 Emerson Network Power offers the latest in UPS battery monitoring technology with products by Albér — a leader in the field since 1972. Albér technologies are designed to prevent battery failure, optimize useful battery life, reduce maintenance cost and increase safety.    > More Information			Albér MPM-100 Battery Monitor Albér MPM-100 battery monitor is a diagnostic system designed for lower cell count applications such as telecom or stationary battery systems. It identifies potential problems by continuously monitoring parameters such as cell voltage, overall string voltage, current and temperature. Automatic periodic tests of battery internal resistance verify the operating integrity of the battery. > More Information
	Albér BDS-40 Battery Monitoring System Albér BDS-40 battery monitoring system mounts to the top of a UPS battery cabinet and monitors 12 volt sealed batteries. The easy-to-use system tracks internal resistance, predicting and reporting failing conditions prior to complete failure to allow proactive replacement. > More Information			Albér BDS-256XL Battery Monitoring System   Albér BDS-256XL battery monitoring system continuously monitors and diagnoses all critical battery parameters for large UPS systems. It can monitor up to 256 cells per string. It identifies potential problems by continuously monitoring parameters such as cell voltage, overall string voltage, current and temperature. Tracking and reporting allow proactive action in replacing a bad battery before it affects others in the string. > More Information

Monitoring and Connectivity

Performance monitoring solutions provide multiple paths for integrating Liebert equipment into your Building or Network Management system. By incorporating open protocols like Modbus, BACnet and SNMP, Liebert delivers robust and effective integrated solutions.

	OpenComms 485 Card The OpenComms 485 Card provides SiteScan Web or Building Management Systems monitoring and control of your UPS. The card delivers, Modbus or Liebert's Proprietary protocol via the EIA-485 port. > More Information			OpenComms NIC-485 Card The OpenComms NIC-485, designed specifically for Liebert precision air conditioning, power and three-phase UPS systems, provides Modbus RTU communications to your current Building Management System. > More Information
	OpenComms NIC The OpenComms NIC Card transforms Liebert units into manageable nodes within your Network, NMS, and BMS systems. > More Information			SiteLink The Liebert SiteLink communication interface allows communications between your existing building management system and Liebert environmental, power and uninterruptible power supply products via Modbus or BACnet. > More Information